康普通讯技术(中国)有限公司诚聘SQE(PCBA) Supplier Quality Engineer
康普通讯技术（中国）有限公司是美国康普公司的子公司，工厂位于苏州工业园苏虹西路68号。公司成立于1997年，位于中国新加坡苏州工业园，占地面积 20,000平方米，现有员工超过3,500人。工厂生产基站天线、射频同轴电缆、接头、电缆组件和滤波器等众多产品。除生产运营团队外，苏州工厂还设有康普集团最大规模的研发中心，为全球客户提供前沿的设计服务，同时拥有客户服务，技术服务中心，为客户提供专业的售前售后服务。Requirements:
1.Major in electronic engineering or automation with bachelor degree at least.
2. Good command of written and spoken English.
3. Minimum 10 years working experience related to Supplier quality engineering, manufacture engineering of SMT.
4. Intimate familiarity with ISO9000/TL9000/TS16949 Quality Systems.
5. Working knowledge of basic and advanced Quality tools, such as Six Sigma, SPC, FMEA, DOE, Control Plans, Root Cause Analysis(8D), Poke Yoke(Error proof), and QC 7 tools etc.
6. PCBA manufacturing expertise . Knowledgeable on IPC-A-600H/610F, Professional on process characteristic in SMT, such as air reflow, solder paste, wave flow, AOI, etc. Good experience to develop DFMEA/PFMEA during new product introduction.
7. Experience with developing/documenting procedures and application of Quality Engineering methods in inspection.
8.Familiar with a wide range of reliability, environmental, and qualification programs.
9.The ability to monitor effectiveness of vendor quality programs as well as development reports and implement corrective action programs on an as needed basis.
10. Assertiveness and excellent communication skills (verbal and written)
11. Excellent decision-making and interpersonal skills are essential.
12. Ability to articulate, defend and negotiate Quality expectations with Suppliers.
13. Be honest, active, independent, willing to take more responsibilities, and able to work under big pressure.
14.Good application of office software (Outlook, Word, Excel, Powerpoint) and understanding/interpretation of 2D drawings.
15.Great logical analysis skills on various quality issues.
16.Some travel
Duties and Responsibilities:
Generic Responsibilities:
1. Quality Improvement : the purposeful change of a process or product to improve its dependability.
2. Quality Assurance : designed systematic preventative actions necessary to provide confidence that products and services meet given requirements all the time
3.Quality Control : inspecting and testing efforts to maintain the integrity of a process or product’s.
4.Responsible for identifying improvement opportunities, provide support with process documentation and metrics identification.
5.Participate in collaborative cross-functional teams to deliver companywide quality solutions incorporating best practices.
6. Participate in improvement projects, establishing benchmarks and best practices and aligning with overall business goals for areas on responsibility.
7.Performs the actions necessary to implement BU and corporate requirements into the CM/suppliers’ processes and systems that ensure the establishment and maintenance of a robust quality program into and at all supplier sites for which there is responsibility, that comply with all company, local or applicable International Quality Standards, as required.
8.Performs the actions necessary to implement BU and corporate requirements into the formulation of standard operating procedures to support the Quality Management System
9. Responsible for monitoring CM/Suppliers’ QA processes to verify that the prescribed methods are being followed.
10. Evaluate the effectiveness (Audit) of the CM/Suppliers’ quality systems to assure compliance to all corporate and local policies, as well as compliance with national and international standards and legislation. Develops, recommends and implements changes as needed based on evaluation
11.Oversee the duties/functions of assigned areas of responsibility necessary to assure regulatory and accreditation compliance and advises the management on these issues.
12.Compliance with testing and inspection procedures.
Specific Responsibilities:
1. QM review and Maintain in SAP
2. Solve material quality issues timely and work with process engineer& design engineer for the specification and drawing improvement
3.Develop analysis/inspection methodology for PCBA, electronic parts, such as x-ray, metallographic etc.
4.Carry out suppliers’ quality system & process audit and assessment and drive for effective improvement actions.
5.Setup supplier quality performance metrics and analyze performance gap between NPI and mass production and take effective actions to eliminate the gap.
6.Work with RD & supplier to implement new technology and process per CommScope’s requirement.
7.FAI/PPAP review during qualification process for new parts/new process/new tool, etc.
8.Perform supplier capability analysis and work with RD/NPI to optimize tolerance setting
9.Work closely with RD/product quality to solve customer complaint in relation to design/reliability/manufacturing from material end.
10.Handle routine material complaints to implement CAPA.
11. Cost reduction projects engagement from quality function.
如欲申请此职位，请在线投递简历或以“姓名 apply for (15)Supplier Quality Engineer(PCBA)(质量部)”为邮件标题发送简历至recruitment.csc@commscope.com，并在简历上注明薪资要求，须同时提供中文及英文简历。谢谢合作！
上班地址：苏州工业园区苏虹西路68号
面试请携带身份证、毕业证、学位证（本科及以上）及其他能证明能力和技能的证件。
本公司提供交通补贴，但不提供班车和宿舍。
乘车路线：
乘坐6路,109路,110路,148路,208路,238路,261路公交车在安德鲁公司站（星港街与苏虹西路交叉东200米）下；
乘坐4路，108路，158路，814路可到湖畔花园下步行至公司10分钟可到；
乘坐2路，28路，47路，100路，106路，120路，156路，215路，219路，812路可到沁苑小区下步行至公司15分钟可到。 谢谢分享。。。 :) :) :) 明天试试 {:1_89:} :) :P
页:
[1]
2