wnagziyi 发表于 2017-8-21 15:56:47

PV 6097: 2007-07 Porosity Determination According to VW 50097

This standard applies to metal castings whose drawings or referenced standards contain porosity specifications according to VW 50097.

Older porosity specifications based on the VDG (German Foundrymen's Association) Specification P 201 shall be treated as corresponding specifications according to VW 50097.

1 Scope..2
2 Aim......2
3 Description ...2
4 Definitions ....2
5 Test procedures ....2
5.1 Specification of reference areas .......2
5.1.1 Permissible reference area geometries .....2
5.1.2 Selection and size of the reference area....3
5.1.3 Position of the reference area..3
5.2 Selection of the section and projection planes....4
5.3 Quality of the reference areas to be evaluated ...4
5.3.1 Reference areas for evaluation of pore class S ..4
5.3.2 Reference areas for evaluation of pore class D ..4
5.3.3 Reference areas for evaluation of pore class F...5
5.3.4 Reference areas for evaluation of pore class G..5
5.4 Evaluation of the reference areas.....6
5.5 Result of the porosity test ........7
5.6 Example of the porosity test ....7
6 Referenced standards ....7
A.1 Pore class D - Problems and errors during specimen preparation and evaluation ....8
A.2 Porosity determination on a metallographic polished microsection .......11
A.3 Representation of microsections of different porosity.16

dw996 发表于 2017-8-21 17:18:23

{:1_101:}

cmlaitw 发表于 2017-8-21 17:59:11

Porosity Determination as per VW 50097

叶平 发表于 2017-8-22 08:22:39

谢谢分享。。。

Jimmy 发表于 2021-9-22 01:28:40

{:1_101:}
页: [1]
查看完整版本: PV 6097: 2007-07 Porosity Determination According to VW 50097