郑军奇 发表于 2022-5-7 11:06:13

巴西批准家用电器合格评定技术要求

2022 年 3 月 31 日,巴西国家计量、标准化和工业质量研究所 (INMETRO/CONMETRO) 发布了 第148号协议,批准家用电器合格评定技术要求。已于 2022 年 5 月 2 日获得认证的家用和类似器具必须在 2027 年 5 月 2 日之前根据附件中规定的适用条件和安排,在产品上采用合规标识印章。本协议于 2022 年 5 月 2 日生效。

On 31 March 2022, the Brazil National Institute of Metrology, Standardisation and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 148 to approve Technical Requirements for Conformity Assessment of Household Electrical Appliances.

This Portaria approves the safety and labelling rules for household and similar appliances, in the form of the Conformity Assessment Requirements and the Specifications for the Conformity Identification Mark, contained in Annexes I and II.

Families of household and similar appliances that are already certified on 2 May 2022 must adopt, by 2 May 2027, the Compliance Identification Seal, affixed on the product, according to the applicable conditions and layout established in Annex II.

Manufacturers and importers of families of household appliances that are already certified must adapt, by 2 May 2025, the certification processes in order to meet, on the packaging, the label conditions and layout established in Annex II.

This Portaria will enter into force on 02 May 2022.

Note: until 31 December 2024, ABNT NBR NM 60335-1:2010 - Safety of Home Appliances and Similar, Part 1: General Requirements - and their respective particular rules; and IEC 60335-1:2006 (Ed. 4.2) - Household and similar electrical appliances - Safety - Part 1: General Requirements, and their respective particular standards, may be followed. After 31 December 2024, only IEC 60335-1:2016 (Ed. 5.2) and its corresponding particular standards, listed in sub-item 3.1, will be accepted.


flyerchang 发表于 2022-5-8 08:57:51

谢谢分享

打脸大大 发表于 2022-5-9 07:49:07

{:1_180:}

chinape 发表于 2022-5-9 08:37:22

{:1_180:}{:1_180:}

wenzhu712 发表于 2022-5-9 08:46:42

:)

高明达兴 发表于 2022-5-10 08:23:30

{:1_180:}{:1_180:}

weken 发表于 2022-5-11 10:54:48

谢谢分享{:1_180:}{:1_180:}{:1_180:}
页: [1]
查看完整版本: 巴西批准家用电器合格评定技术要求