13886331248 发表于 2025-1-11 10:50:30

PPAP相关表单合集-参考

PPAP相关表单合集-参考


[*]Design Records (设计记录)
[*]Engineering Change Documents (If any) (工程变更文件)
[*]Customer Engineering Approval (If required) (客户工程批准文件)
[*]Design FMEA (设计潜在失效模式分析)
[*]Process Flow Diagrams (过程流程图)
[*]Process FMEA (过程潜在失效模式分析)
[*]Pre-launch Control Plan (试生产控制计划)
[*]Production Control Plan (生产控制计划)
[*]Measurement System Analysis Studies (测量系统分析)
[*]Dimensional Results (Layout with PPAP) (尺寸报告)
[*]Material Test Results (材料测试/证明报告，并附原始报告)
[*]Performance Test Results (性能报告，并附原始报告)
[*]Initial Process Study (过程能力分析)
[*]Qualified Laboratory Documentation (实验室文件)
[*]Appearance Approval Report (AAR), If applicable (外观报告)
[*]Sample Product (样品)
[*]Master Sample (标准样品)
[*]Checking Aids (检具)
[*]Any additional (Customer Specific) requirement & record of Compliance with the same, including: (其他)
[*]Part Submission Warrant (PSW)
[*]Bulk Material Checklist, if applicable (散装材料要求检查清单)
[*]Processing Parameter (工艺参数表)
[*]Package & Transport Specification (包装规范)
[*]Direct material and Supplier list (分供方清单)
[*]Shipmemt inspector report format (出货报告样张)
[*]Part List (零件清单)
[*]Prototype or Batch Sample Approal (样件审批)
[*]Customer Material specification (Hard Copy) (材料规范 硬拷贝)
[*]Supplier Production Rate 供应商生产节拍
[*]Floor Plan 场地平面布置图

njkiller 发表于 2025-1-11 13:49:21

有示例就好了

G_Darius 发表于 2025-1-11 13:54:53

感谢分享

远方 发表于 2025-1-11 13:59:22

{:1_89:}

机会 发表于 2025-1-11 14:28:16

{:1_180:}

engineerofficer 发表于 2025-1-11 14:48:00

感谢分享

hzn 发表于 2025-1-11 15:34:06

{:1_180:}

ntgary 发表于 2025-1-11 16:00:34


谢谢分享

xiang129 发表于 2025-1-11 16:30:48

{:1_180:}

badboy0133 发表于 2025-1-11 18:14:26

感謝分享
页: [1] 2 3 4 5 6 7 8
查看完整版本: PPAP相关表单合集-参考