品质论坛 › 澳洲SAA认证, AS/NZS › Junction Box AS/NZS 3100:2009, AS/NZS IEC 60670.1:2012, AS/NZS IEC 60670.22:22

郑军奇 发表于 2022-2-24 11:46:59

Junction Box AS/NZS 3100:2009, AS/NZS IEC 60670.1:2012, AS/NZS IEC 60670.22:22

Junction Box Australia certification test standard, AS/NZS 3100:2009, AS/NZS IEC 60670.1:2012, AS/NZS IEC 60670.22:2012,

AS/NZS 3100:2009 Approval and test specification Annex A Figure A1

AS/NZS IEC 60670.1:2012 Boxes and enclosures for electrical accessories (general requirements)

AS/NZS IEC 60670.22:2012 Boxes and enclosures for electrical accessories (connecting boxes and enclosures)

Summary of minimum requirement of standards:

According to lEC 60670.1:2012 Clause 18, the FCN connectors must pass the 850℃ Gw test and the Junction Box lids must pass the 650℃ GW test specified in AS/NZS 60695.2.11.

However, according to AS/NZS 3100:2009 Annex A, if the FCN connectors pass the 850℃ GW but with a flame that persists for 2s, the Junction Box lids (because they are impinged by the flame) must pass the consequential needle flame test of A 6.1.5.

pdcicbt 发表于 2022-2-24 22:50:05

謝謝分享

aipinzhia0 发表于 2022-2-25 11:00:49

:)

打脸大大 发表于 2022-2-27 22:02:57

:)

Jimmy 发表于 2022-2-27 23:33:43

{:1_101:}

aipinzhia0 发表于 2022-2-28 08:33:16

:)

aipinzhia0 发表于 2022-3-4 11:30:48

:)

xinyi250218 发表于 2022-3-8 14:32:07

{:1_180:}

zw28670616 发表于 2022-3-9 16:51:02

{:1_89:}

QYGUWEN 发表于 2022-3-19 10:25:38

{:1_180:}

查看完整版本: Junction Box AS/NZS 3100:2009, AS/NZS IEC 60670.1:2012, AS/NZS IEC 60670.22:22