haisenor 发表于 2024-6-24 16:26:56

（原版）ASTM Standards F 1852 - 14

本帖最后由 haisenor 于 2024-7-5 13:48 编辑

ASTM Standards F 1852 - 14

Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

This standard is issued under the fixed designation F1852; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.

leaper 发表于 2024-6-24 17:46:00

谢谢分享

flyerchang 发表于 2024-6-24 18:32:46

谢谢分享

TBD16888 发表于 2024-6-25 04:37:30

谢谢分享

efa1188 发表于 2024-6-25 05:22:43

谢谢分享

neil0404 发表于 2024-6-25 05:45:42

谢谢分享

CZQ18814302809 发表于 2024-6-25 07:58:30

谢谢分享

golfgti 发表于 2024-6-25 09:27:26

Thanks for sharing

pdcicbt 发表于 2024-6-25 09:30:35

Thanks

billye 发表于 2024-6-25 10:10:21

感谢分享
页: [1] 2
查看完整版本: （原版）ASTM Standards F 1852 - 14