UTC Production Part Approval Process (UPPAP)

carson754628

This specification defines requirements for validating a manufacturing or assembly process which produces parts for a United Technologies Corporation (UTC) Member company.

The purpose of the specification is to ensure that all Member engineering and quality requirements are understood and fulfilled and that the manufacturing processes have been proven to consistently meet these requirements at the intended production rate by integrating upfront quality planning.

UPPAP will drive the identification and mitigation of risk early in the design and process development phases and ensure continuous design and process improvement. UPPAP will help ensure that Customer requirements are met, improve the Supplier's quality signature and lower the cost of poor quality.

Note: UPPAP is modeled after the Automotive Industry Action Group’s (AIAG) Production Part Approval Process (PPAP) however differences exist given the distinctive requirements found in the aerospace industry.

皮卡丘

本规范定义了验证制造或验证的要求。
为联合技术公司生产零件的装配工艺
（UTC）成员公司。
该规范的目的是确保所有成员工程和
质量要求得到理解和满足，制造
过程已被证明在这些方面始终满足这些要求。
通过先期质量计划集成的预期生产率。
uppap会开车在设计早期减轻风险的识别
过程开发阶段，确保持续的设计和过程
改进。uppap将帮助确保满足客户的需求，
提高Supplier质量标志降低质量成本。
注：uppap是仿照美国汽车工业行动集团（AIAG）后
生产件批准程序（PPAP）然而存在差异
鉴于航天工业的特殊要求。

皮卡丘

皮卡丘 发表于 2017-9-15 08:49
本规范定义了验证制造或验证的要求。
为联合技术公司生产零件的装配工艺
（UTC）成员公司。

  是呀  

liuqunying

皮卡丘 发表于 2017-9-15 08:49
本规范定义了验证制造或验证的要求。
为联合技术公司生产零件的装配工艺
（UTC）成员公司。

叶平

谢谢分享。。。

桃之∩_∩夭夭

Daren

carson754628

Daren 发表于 2017-9-15 13:46

carson754628

fpah86

挺好的资料，谢谢楼主